Shimano Bb Tool For Hollowtech Ii Cups
-
Shimano Bb Tool For Hollowtech Ii Cups
Review this store
Hand Tools
Shimano
Shimano BB Tool For Hollowtech II Cups: Designed specifically for the installation and removal of the new hollow tech 2, 2004 XTR (FCM960) bottom bracket
£13.49
Visit Store »
Similar Products
 
|
Park Tools Hollowtech Ii Bb And Crank Arm Tool Hand Tools Park Tools Park Tools Hollowtech II BB And Crank Arm Tool: The BBT-9 is used to remove and install Shimano® Hollowtech II, Campagnolo Ulta-Torque, and many other external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups, the other end of the tool engages the 8 internal splines of the crank arm adjustment cap. The BBT-9 also fits the rotor disc lockrings using 16 external notches. A highly durable metal tool to remove and install Shimano Hollowtech II integrated Bottom Brackets and chainsets 16 Laser cut splines securely engage the notches of the bottom bracket cups, while the other end fits the 8 internal splines of the crank arm adjustment cap Plastic coated handle for a secure and comfortable grip Warning: this tool has a long handle and it is possible to damage the tool or the component by overtightening during installation Recommended torque setting for bottom bracket cups: 35 - 50 Nm Recommended torque setting for crank arm adjustment cap: 0.4 - 0.7 Nm Review this product |
Review this store |
£17.99 |
Visit Store » |
|
Park Tools Hollowtech Ii Bottom Bracket Tool Hand Tools Park Tools Park Tools Hollowtech II Bottom Bracket Tool: The BBT-19 is a heavy duty, shop quality tool for installing and removing Shimano, Race Face, FSA, Campagnolo and Truvativ sixteen-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be turned with a 3/8 inch drive torque wrench, 3/8 inch ratchet driver, 1 inch wrench, or FRW-1 Freewheel Remover Wrench. Review this product |
Review this store |
£20.69 |
Visit Store » |
|
Lifeline Shimano/truvativ Hollowtech Bottom Bracket Tool Hand Tools LifeLine LifeLine Shimano/Truvativ Hollowtech Bottom Bracket Tool: Bottom bracket wrench for use with Shimano hollowtech II and Truvativ GXP bottom brackets. All in one bottom bracket cup fitting and removal tool, the long arm provides plenty of leverage to remove stubborn cups. In the end of the tool you will also find a pre-load tool to get your cranks set-up correctly. Review this product |
Review this store |
£9.49 |
Visit Store » |
|
Shimano Dura Ace 7800 Hollowtech Ii Double Chainset Cycling Shimano Shimano Dura Ace 7800 Hollowtech II Double Chainset: The Dura-Ace 10-speed crankset is the most visual change in the Dura-Ace component list. From a technical perspective it's the single most advanced component in the new group. The new Dura-Ace chainset uses a two-piece design to maximize its stiffness for the optimum power transfer and minimal weight. A hollow cro-moly spindle is press-fitted into the driveside of the Hollowtech II crankarm, this spindle is what rotates in the new external cups, with little or no flex or loss of power. The bottom bracket bearings are now located outside of the bottom bracket shell to accomodate the oversized axle. The bearings are wider apart in comparison to the 9-speed's, this provides more axle support, yet again improving the power transfer. Amazingly though the Q-factor of the new crankset is unchanged from the 9-speed version. While the cranks themselves look substantially sturdier, when you combine the total weight of chainset and bottom bracket, it saves you 30g in comparison to its 9-speed predecessor. Not only have Shimano improved the crank arms, they have also machined the new rings to be lighter whilst still retaining extremely smooth and precise shifting. The Dura-Ace advantage has been proven on great road courses of the world. Dura-Ace road chainsets are available in the following lengths: 165mm, 170mm, 172.5mm, 175mm, 177.5mm, 180mm. Review this product |
Review this store |
£314.49 |
Visit Store » |
* Must be complete