Dive Rite Water Sports
| Dive Rite Water Sports 1 to 27 of 27 |
 
|
Replacement Lockdown Screw Water Sports Dive Rite Replacement lockdown screw for Dive Rite reels, plastic screw that holds the reel in place. Review this product |
 Review this store |
£3.00 |
Visit Store » |
|
Octo Guard Water Sports Dive Rite Surgical tubing designed to hold octopus under chin and easy to find (Standard). (Caution: if in doubt please call our technicians for advice before fitting) Mini option clips to BCD to hold octopus. Review this product |
Review this store |
£5.00 |
Visit Store » |
|
Crotch Strap Water Sports Dive Rite For use with Dive Rite harnesses with scooter ring1" Version shown in picture. Review this product |
Review this store |
£5.95 |
Visit Store » |
|
Cam Straps Water Sports Dive Rite For use with Dive Rite back plates to attach cylinders. Fits single cylinders using metal buckle.Please Note: Buckle not supplied Review this product |
Review this store |
£9.00 |
Visit Store » |
|
Stabilizing Plates Water Sports Dive Rite Dive Rite stabilizing plates, set of two. Stainless steel suitable for mounting doubles. Review this product |
Review this store |
£12.97 |
Visit Store » |
|
Mask Utility Pocket Water Sports Dive Rite Dive Rite's Mask/Utility Pocket now holds back-up mask, jon line, and similar size items. The front of the pocket is made from a special, heavy-duty mesh. This enables water inside the pocket to drain almost instantly when you exit the water. Dimensions: 10" high x 4" wide x 2.5" deep Review this product |
Review this store |
£15.95 |
Visit Store » |
|
High Pressure Hose 6 Inch Water Sports Dive Rite Dive Rite high pressure 6" hose 7/16" fitting Review this product |
Review this store |
£20.00 |
Visit Store » |
|
Low Pressure Hose - 22 Inch Water Sports Dive Rite Dive Rite 22" low pressure hose. Review this product |
Review this store |
£20.00 |
Visit Store » |
|
Stage Carry Strap Water Sports Dive Rite Quickly convert any cylinder to a stage or deco cylinder. The upper loop slips over the tank valve and has a D-ring to which you clip your regulator second stage. You can secure the bottom with either a cam band or stage clamp (supplied separately) Review this product |
Review this store |
£25.00 |
Visit Store » |
|
Standard Harness Water Sports Dive Rite Standard Harness from Dive Rite. For use with Dive Rite wings instead of Transpac 2 harness. Made from a single piece of continuous webbing. Remember to select harness type and cam straps to work with this backplate. Dive Rite's line of harnesses allow you to custom fit stainless steel or aluminum backplates to fit your various diving needs. Harnesses are designed with waist, shoulder D-rings, and a quick release chest strap and can have any of Dive Rite's BC accessories or cutting devices affixed to them. Review this product |
Review this store |
£27.00 |
Visit Store » |
|
Cam Strap With Stainless Steel Cam Buckle Water Sports Dive Rite Standard cam strap with stainless steel cam buckle Review this product |
Review this store |
£27.00 |
Visit Store » |
|
Shoulder Straps For Transpac Harness Water Sports Dive Rite Replacement shoulder straps for Transpac weight harnesses. Lrg only. Review this product |
Review this store |
£35.00 |
Visit Store » |
|
Aluminium Backplate Water Sports Dive Rite For use with Dive Rite wings instead of Transpac 2 harness. Remember to select harness type and cam straps to work with this backplate. Review this product |
Review this store |
£40.50 |
Visit Store » |
|
Jump Gap Reel Water Sports Dive Rite Cave divers use the compact Jump/Gap Reel to make a temporary connection between the ends of permanent guidelines, or to "jump" to offshoot lines. It comes with 50 feet of #24 line. Review this product |
Review this store |
£42.00 |
Visit Store » |
|
Deluxe Quick Release Harness Water Sports Dive Rite The Deluxe Quick Release Harness from Dive Rite incorporates a cross-chest strap and shoulder-strap pivot rings that increase comfort. Quick release buckle is on the shoulder. (Shown with optional 1.0-inch crotch strap w/scooter ring(not included). Dive Rite's line of harnesses allow you to custom fit stainless steel or aluminum backplates to fit your various diving needs. Harnesses are designed with waist, shoulder D-rings, and a quick release chest strap and can have any of Dive Rite's BC accessories or cutting devices affixed to them.Please note harness sold seperately. Review this product |
Review this store |
£43.50 |
Visit Store » |
|
Transweight System Water Sports Dive Rite Two pockets that carry up to 16 pounds of block or bag lead weight per pocket for a total of 32 pounds. The 32 is popular with cold water dry suit divers who must carry a lot of weight to counteract the additional buoyancy caused by heavy undergarments and thicker suit materials.Dimensions: 8.5" high x 6" wide x 1.5" deep Review this product |
Review this store |
£69.95 |
Visit Store » |
|
Primary Reel Water Sports Dive Rite Cave and wreck divers typically use the Primary Reel as their main navigation reel; it has many other potential uses as well. Review this product |
Review this store |
£77.50 |
Visit Store » |
|
Stainless Backplate Water Sports Dive Rite For use with Dive Rite wings instead of Transpac 2 harness. Remember to select harness type and cam straps to work with this backplate. Review this product |
Review this store |
£96.00 |
Visit Store » |
|
Transplate Harness Water Sports Dive Rite A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate. Designed like a mountaineer's backpack, the TransPlate harness disperses weight across the hips and back, minimizing shoulder strain. When used with a 6-pound steel backplate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories. The TransPlate is designed to be used with any wing, except the Travel Wing, in the Dive Rite line. Available in sizes M-XXL. Made in the U.S.A. Review this product |
Review this store |
£119.00 |
Visit Store » |
|
Classic Wings Water Sports Dive Rite Classic Wing is diving's first air cell designed specifically for use with double cylinders. They provide up to 59 pounds/27 kg of lift. They are designed for use with medium- to heavyweight doubles (Classic Wings should not be used with single cylinders). These wings can accommodate up to two 104-cubic-foot/16 litre back-mounted cylinders, and one 80-cubic-foot/11 litre stage bottle. A 22-inch/56cm low-pressure inflator hose is standard. Classic Wing is popular among many hard-core cave divers, who appreciate its simple, streamlined, time-tested design. Review this product |
Review this store |
£178.00 |
Visit Store » |
|
Transpac Trek Wing Water Sports Dive Rite Trek Wings provide up to 40 pounds of lift. They are best suited for use with single cylinders of any size, and with light- to medium-weight double cylinders ("a shorter air cell for shorter cylinders"). Trek Wings are a good choice for divers whose time is divided between diving with singles and lightweight doubles. Frequently used with double aluminum 80s, they prevent side-to-side sloshing of large air pockets common with larger air cells. Further, Trek Wings are clearly the air cell for side mounting. Review this product |
Review this store |
£179.00 |
Visit Store » |
|
Transpac Harness Water Sports Dive Rite Inspired by a remote dive exploration in Japan where divers had to hike their heavy gear through dry portions of cave to get to the underwater sumps. The explorers also needed the versatility to switch their gear configuration from backmount to sidemount to single tanks (flexibility that a traditional hard backplate does not offer). Designed like a mountaineer's backpack, the TransPac disperses weight across the hips and back, minimizing shoulder strain. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing.A soft backplate accommodates sidemount diving, yet gives appropriate support for single tanks, double tanks or rebreathers. Slots in the backplate fit standard 36-inch cam straps (included) for single tank diving. The modular design allows for customization using an assortment of pockets and accessories, depending on the needs and desires of the individual diver. The TransPac is lightweight and flattens easily into a suitcase for travel. The TransPac is designed to be used with any wing in the Dive Rite line. Made in the U.S.A.Please note: The Dive Rite TransPac is not designed to be worn with a metal backplate.(To select correct size measure from the top of the shoulder to a point on the waistline immediately below the armpit: XS-33-41cm, S- 36-44cm, M/L- 43-55cm, XL- 47-60cm, XXL- 57-70cm) Review this product |
Review this store |
£195.00 |
Visit Store » |
|
Transpac Rec Wing (single Bladder) Water Sports Dive Rite Designed to be worn with double tanks or singles, the Rec Wing is our most popular due to its versatility. The Rec Wing employs a Gusset Control System (GCS) cord woven through tabs on the front face of the wing. When tightened, the cord limits lift capacity so the Rec Wing can be used with single backmount tanks. When the GCS cord is loosened, the Rec Wing provides its full lift capacity of 51 pounds/23 kg of lift and can accommodate two 95 ft3/15 L back mounted cylinders. Loose or tight, the GCS cord helps the Rec Wing maintain a small profile for divers traversing in tight passages and the cord compression helps in dumping air. Tough, ballistic nylon outer bag protects the wing from tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical resistant and resists the growth of microorganisms. Choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo corrugated hose along with either 15-inch, 22-inch or 27-inch low pressure inflation hose. The Rec Wing is designed for use with the TransPac, TransPlate or any webbing-style harness. Made in the U.S.A. Review this product |
Review this store |
£202.00 |
Visit Store » |
|
Transpac Venture Wing Water Sports Dive Rite The Venture Wing is designed specifically for applications combining single cylinders with either the TransPac or TransPlate as well as a traditional backplate/harness configurations. The Venture wing's 30-pound capacity works with the largest of single aluminum or steel cylinders. Review this product |
Review this store |
£225.00 |
Visit Store » |
|
Nitek Plus Water Sports Dive Rite The NiTek Plus is a user-friendly dive computer and wristwatch in one small, sophisticated package. A Nitrox computer, the NiTek Plus turns on automatically upon descent and monitors up to two different gases. Mix 1 is programmable for Nitrox mixes ranging from 21-50% and Mix 2 is programmable for Nitrox mixtures ranging from 21-99%. Underwater, divers can switch between mixes with the push of a button. Upon surfacing, the NiTek Plus will maintain the gas mixture entered until midnight, when it clears and must be reset the following day. Using a modified Buhlmann ZH-L16 algorithm, the NiTek Plus can calculate decompression stop times for required stops as deep as 90-feet. Simple to program, the NiTek Plus has intuitive menus that are easy to understand without complex instructions. Small and lightweight, the NiTek Plus is an ideal dive watch and travel computer making it hard to forget your dive computer at home or lose it when traveling abroad. Review this product |
Review this store |
£280.00 |
Visit Store » |
|
Transpac Rec Wing (dual Bladder) Water Sports Dive Rite The Dual Rec Wing was created for technical divers in the South Pacific who dive double tanks wearing wetsuits as their exposure protection. These divers needed a secondary inflation source since they do not wear drysuits, plus they wanted the ability to use the same wing on single tank, shallow dives. With the same versatility and lift capacity of the Rec Wing, the Dual Rec incorporates two bladders to provide back-up inflation. It is ideal for technical divers who dive wet and do not have a drysuit as alternate inflation or for any diver who wants to ensure their backup inflation has the same lift capacity as their primary inflation. The Dual Rec Wing employs the same Gusset Control System (GCS) cord as the Rec Wing. Woven through tabs on the front face of the wing, the cord limits lift capacity when tightened so the Dual Rec Wing can be used with single, backmount tanks. When the GCS cord is loosened, the Dual Rec Wing provides its full lift capacity of 51 pounds/23 kg of lift and can accommodate two 95 ft3/15 L back mounted cylinders. Loose or tight, the GCS cord helps the Rec Wing maintain a small profile for divers traversing in tight passages and the cord compression helps in dumping air. Tough, ballistic nylon outer bag protects the wing from tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical resistant and resists the growth of microorganisms. Primary inflation hose has choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo along with either 15-inch, 22-inch or 27-inch low pressure inflation hose. Choice of 16-inch or 12-inch elbow corrugated hose with either 15-inch or 22-inch low pressure inflation hose for back up. The Dual Rec Wing is designed for use with the TransPac, TransPlate or any webbing-style harness. Made in the U.S.A. Review this product |
Review this store |
£288.00 |
Visit Store » |
|
Transpac Super Wings (dual Bladder) Water Sports Dive Rite The Super Wing incorporates two bladders to provide back-up inflation. It is designed for cold-water technical divers who need exceptional lift to counterbalance the negative buoyancy effects of thick wetsuits at depth along with their heavy gear and in order to float high above water in heavy, rough seas. The Super Wing is also ideal for any diver who carries multiple heavyweight tanks. TheSuper Wing employs a Gusset Control System (GCS) cord woven through tabs on the front face of the wing. The GCS cord helps the Super Wing maintain a small profile for divers traversing in tight passages and the helps compression when dumping air. The Super Wing provides up to 90 pounds/41 kgs of lift and can accommodate two 120 ft3/19 L back mounted cylinders and two 80 ft3 /11 L stage bottles. Tough, ballistic nylon outer bag protects the wing from tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical resistant and resists the growth of microorganisms. Primary inflation hose has choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo along with either 15-inch, 22-inch or 27-inch low pressure inflation hose. Choice of 16-inch or 12-inch elbow corrugated hose with either 15-inch or 22-inch low pressure inflation hose for back up. The Super Wing is designed for use with the TransPac, TransPlate or any webbing-style harness. Made in the U.S.A.Please note: the Super Wing is designed for use heavyweight double tanks and is not for use with single tanks. Review this product |
Review this store |
£302.00 |
Visit Store » |
| Dive Rite Water Sports 1 to 27 of 27 |